


- LTC2261IUJ-14#PBF - 集成电路(IC) > 数据采集 > 模数转换器(ADC)
- MAX9730EBP+T - 线性 - 放大器 - 音频
- MAX20047AFPB/V+T - 集成电路(IC) > 电源管理(PMIC) > 电池充电器
- MAX6439UTMSYD3+T - 电池管理芯片
- MAX4210BEUA-T - 电源管理IC - 电流调节和管理
- LTC1473IGN - 集成电路(IC) > 电源管理(PMIC) > OR 控制器,理想二极管
- MAX6955ATL+T - 集成电路(IC) > 电源管理(PMIC) > 显示驱动器
- MAX6732AUTTZD5+T - 监控器芯片
- DS1233DZ-5 - 集成电路(IC) > 电源管理(PMIC) > 监控器
- PD42-3-1240-TMCL - 电机,电磁阀,驱动器板/模块 > 步进电机



AD9640 - 14-Bit, 80/105/125/150 MSPS, 1.8 V Dual Analog-to-Digital Converter
AD9640是AD公司的一款高速ADC (> 10MSPS)产品,AD9640是14-Bit, 80/105/125/150 MSPS, 1.8 V Dual Analog-to-Digital Converter,本站介绍了AD9640的封装应用图解、特点和优点、功能等,并给出了与AD9640相关的AD元器件型号供参考。
AD9640 - 14-Bit, 80/105/125/150 MSPS, 1.8 V Dual Analog-to-Digital Converter - 高速ADC (> 10MSPS) - 模数转换器 (ADC) - Analog Devices
The AD9640 is a dual 14-bit, 80/105/125/150 MSPS analog-to-digital converter (ADC). The AD9640 is designed to support communications applications where low cost, small size, and versatility are desired.
The dual ADC core features a multistage, differential pipelined architecture with integrated output error correction logic. Each ADC features wide bandwidth differential sample-and-hold analog input amplifiers supporting a variety of user-selectable input ranges. An integrated voltage reference eases design considerations. A duty cycle stabilizer is provided to compen-sate for variations in the ADC clock duty cycle, allowing the converters to maintain excellent performance.
The AD9640 has several functions that simplify the automatic gain control (AGC) function in the system receiver. The fast detect feature allows fast overrange detection by outputting four bits of input level information with very short latency.
In addition, the programmable threshold detector allows moni-toring of the incoming signal power using the four fast detect bits of the ADC with very low latency. If the input signal level exceeds the programmable threshold, the fine upper threshold indicator goes high. Because this threshold is set from the four MSBs, the user can quickly turn down the system gain to avoid an overrange condition.
The second AGC-related function is the signal monitor. This block allows the user to monitor the composite magnitude of the incoming signal, which aids in setting the gain to optimize the dynamic range of the overall system.
The ADC output data can be routed directly to the two external 14-bit output ports. These outputs can be set from 1.8 V to 3.3 V CMOS or 1.8 V LVDS.
Flexible power-down options allow significant power savings, when desired.
Programming for setup and control is accomplished using a 3-bit SPI-compatible serial interface.
The AD9640 is available in a 64-lead LFCSP and is specified over the industrial temperature range of ?40°C to +85°C.
Product Highlights
- Integrated dual 14-bit, 80/105/125/150 MSPS ADC.
- Fast overrange detect and signal monitor with serial output.
- Signal monitor block with dedicated serial output mode.
- Proprietary differential input that maintains excellent SNR performance for input frequencies up to 450 MHz.
- Operation from a single 1.8 V supply and a separate digital output driver supply to accommodate 1.8 V to 3.3 V logic families.
- A standard serial port interface that supports various product features and functions, such as data formatting (offset binary, twos complement, or gray coding), enabling the clock DCS, power-down, and voltage reference mode.
- Pin compatibility with the AD9627, AD9627-11, and the AD9600 for a simple migration from 14 bits to 12 bits, 11 bits, or 10 bits.
Applications
GSM, EDGE, WCDMA, LTE,
CDMA2000, WiMAX, TD-SCDMA
本页提供AD9640的评估板文档和订购信息。
无
- AD8594 - CMOS单电源RRIO四通道运算放大器,具有±250 mA输出电流和省电关断模式
- ADP2302 - 2A、700KHz异步降压型DC-DC开关调节器
- ADP1707 - 1 A、低压差、CMOS线性稳压器,具有跟踪特性
- ADG5404F - 故障保护和检测、10 ? RON、4通道多路复用器
- AD5307 - 2.5 V至5.5 V、400 μA、四通道、电压输出8位DAC,采用16引脚TSSOP封装
- ADCLK944 - 2.5 V/3.3 V、4路LVPECL输出、SiGe时钟扇出缓冲器
- HMC-ALH313 - 低噪声放大器芯片,27 - 33 GHz
- ADP5586 - 键盘解码器和I/O端口扩展器
- AD5251 - I2C, 非易失性存储器、双通道、64位数字电位计
- AD5235 - 非易失性存储器、双通道1024位数字电位计



